Skip to main content

Jaw and tooth misalignment: How orthodontics can help

Advertisement

What is the difference between misaligned teeth and a malocclusion?

In the case of misaligned teeth, individual teeth are twisted or lie outside the dental arch. However, the upper and lower jaws fit together correctly when biting down. The upper jaw rests on the lower jaw much like a lid on a box. The teeth interlock like a zip: the bite is correct. Specialists refer to this as a Class I occlusion.

In the case of a malocclusion, the upper and lower jaws are displaced relative to one another either sideways, forwards or backwards. This means that the upper and lower jaws do not fit together properly when biting down, resulting in premature or incorrect contact between the teeth: the bite is incorrect. Malocclusions are largely genetic in origin and are therefore inherited. They usually occur alongside dental misalignment.

What types of malocclusion are there?

Class II malocclusion

Often, the lower jaw has not grown far enough forwards during puberty; as a result, it lies behind the upper jaw at a greater or lesser distance (= increased overbite; retrusion of the lower jaw; technical term: mandibular retrognathia). The cusps of the upper teeth do not fit into the corresponding grooves of the lower teeth. They either come into contact with the cusps or marginal ridges of the lower teeth or, in the worst-case scenario, make no contact at all (= non-occlusion).

Class II/1 occlusion

This mandibular retrognathia is often incorrectly referred to colloquially as an ‘overjet’, as this malocclusion is frequently accompanied by upper incisors that are significantly tilted forwards and by difficulty in closing the lips

Class II/2 malocclusion

However, there are also forms of mandibular retrusion in which the upper incisors are tilted significantly backwards and have grown downwards. This results in a deep bite and an overbite.

Class III malocclusion

It is less common for the lower jaw to grow too strongly and too far forwards, causing it to protrude in front of the upper jaw (= inverted overbite; technical term: mandibular prognathism). In Austria, this growth disorder of the lower jaw is also known as the ‘Habsburg lower lip’, as this distinctive malocclusion was passed down in a pronounced form within the Habsburg noble family.

The following illustration shows mandibular prognathism, a correct jaw position and mandibular retrognathism.

unterschiedliche Kieferfehlstellungen
Photo: Association of Austrian Orthodontists

Lateral crossbite and forced bite

If, on the other hand, the upper jaw is too narrow or the lower jaw too wide, the lower jaw is displaced to the right or left when biting down. This, in turn, results in atypical and unfavourable tooth contacts between the upper and lower teeth.

The following illustration shows a Class II malocclusion, a Class III malocclusion and a crossbite.

Abbildung Kieferfehlstellungen
Photo: Association of Austrian Orthodontists

Does every misalignment of the teeth and/or jaws need to be corrected?

Specialist orthodontists recommend correction if the misalignment of the teeth and/or jaws could lead to the following problems:

  • Incorrect tooth contacts: Due to incorrect loading, damage may occur to the teeth, the tooth roots and the periodontium (bone and gums), as well as to the temporomandibular joint. If the alignment of the teeth is expected to deteriorate over time, specialists advise correction.
  • Pronounced jaw misalignments (particularly in cases of mandibular retrusion): These often lead to an open-mouth posture with mouth breathing, as it is not possible to close the lips in a relaxed manner. Affected patients breathe through their mouths rather than their noses. As a result, the air they breathe is neither filtered, moistened nor warmed.

Those affected are more prone to colds, which impair nasal breathing. Furthermore, when the mouth is held open, the tongue – which normally rests against the palate – remains in the lower jaw. This also prevents the natural shaping and widening of the palate by the tongue muscles.

  • Crossbites and forced bites lead to asymmetrical, uneven growth of the lower jaw. The chin deviates to one side, and the face ‘becomes lopsided’. Due to the uneven chewing function, this can lead to dysfunction and overloading of the temporomandibular joints, and subsequently to their premature wear and tear.
  • If the size of the jaw and the teeth do not match – for example, because the jaw is too small and the teeth are too large – this can lead not only to misaligned teeth but also to problems with tooth eruption. It is common for the upper canine teeth not to erupt and to remain in the palate. If this abnormality is not detected and corrected at an early stage, in the worst-case scenario the teeth may need to be surgically removed and subsequently replaced with artificial teeth (implants).

The illustration shows pronounced malocclusions which, from a medical point of view, should definitely be assessed by specialist orthodontists.

Markante Zahnfehlstellungen
Image: Austrian Association of Orthodontists

When is an orthodontic examination advisable?

For every type of misalignment, there is an optimal time to correct it. Only specialists, thanks to their in-depth training, can determine when and with which type of appliance treatment will be most successful in the shortest time. Although malocclusions can now be corrected in adults right up to old age, missing the optimal time usually means a great deal of technical effort is required. Sometimes orthognathic surgery is necessary, or compromises have to be made. In principle, it is never too late for corrective treatment!

Around 30–40 per cent of children and adolescents suffer from misaligned teeth and jaws, which, if left untreated, can have a long-term impact on their quality of life and health. Not all misalignments can be detected by a layperson at first glance. For this reason, the following basic orthodontic examinations by specialists are recommended:

  • Examination at age 4 (milk teeth)
  • Examination at age 8 (early mixed dentition)
  • Examination at age 12 (late mixed dentition)

How does orthodontic treatment work?

An overview of the individual steps in orthodontic treatment:

  1. Consultation: The reason for the visit to the orthodontist is discussed. A clinical examination is also carried out.
  2. Diagnostic records are compiled to accurately assess the condition of the teeth, the oral cavity and the jaw. These include impressions or intraoral scans, functional analyses of the temporomandibular joints and masticatory muscles, as well as X-rays (panoramic and lateral cephalometric X-rays). In addition, photographs of the face and teeth are taken.
  3. The records are then analysed.
  4. Setting treatment objectives and a treatment plan, selecting the appropriate appliances
  5. This is followed by a consultation during which the course of treatment is decided jointly.
  6. Treatment usually lasts around 2–3 years.
  7. Stabilisation of tooth position (retention): Particularly shortly after treatment, the teeth tend to return to their previous position. Further measures are therefore necessary to guarantee a lasting result.

What is meant by orthodontic diagnostics?

Experienced specialist orthodontists possess extensive knowledge in many areas. These include:

  • normal (physiological) and abnormal (pathological) facial and jaw growth
  • individual differences in facial and jaw growth
  • links to breathing, speech and tongue function
  • other factors that influence the development of the dentition and face

With this knowledge and the most precise examinations, they are able to determine the nature and severity of any existing abnormalities, along with their causes. An individual treatment plan must be drawn up before any orthodontic treatment begins. The analysis of numerous individual findings leads to a detailed diagnosis. Only then can the treatment objective, the treatment plan and the individual stages of treatment be determined. At this stage, a decision is made as to which treatment method and appliances are suitable.

Just like a jigsaw puzzle, the individual pieces of the orthodontic assessment and evaluation lead to a personalised diagnosis. Responsible planning and a clear definition of the achievable treatment goal help to set realistic expectations. This protects everyone involved from disappointment! During treatment, check-ups are carried out from time to time to review the progress of treatment and the treatment plan, and to make adjustments where necessary.

What are the treatment options for crooked teeth?

Removable appliances

Removable appliances are manufactured in dental laboratories according to precise instructions from the orthodontist. This is done on the basis of accurate jaw models and special wax impressions (wax registrations, design bite). They consist of a plastic body into which various wire components or screws are fitted. These can have an active or passive effect:

  • active effect: pressure is exerted on the teeth or the jaw.
  • Passive effect: The tongue, lips or cheeks are held at a distance.

Transparent plastic aligners

This treatment technique has been around for a very long time and is becoming increasingly popular, particularly amongst adults. Contrary to what some adverts claim, aligners are not a fully-fledged substitute for fixed braces, as plastic aligners only allow for limited tooth movement in some cases. Not all misalignments can be corrected with an aligner.

Aligners are worn day and night and are only removed for eating and brushing teeth. Every two to three weeks, the patient switches to a new, active aligner. To ensure better force transmission, white plastic attachments are required on the outer surface of the teeth. Sometimes, elastic bands and other auxiliary elements are also needed to enable certain tooth movements. For several years now, there have been companies offering orthodontic treatment with aligners ‘by post’. However, these do not adhere to dental and orthodontic standards.

But be warned! Orthodontic treatment using aligners is risky if it is not accompanied by proper diagnosis and regular clinical check-ups by qualified orthodontists. The health of your teeth, the periodontium and the temporomandibular joint can be compromised. Teeth are not dominoes that can be moved at will.

Your orthodontist will advise you on whether your misalignment should be corrected using aligners or, alternatively, with fixed braces. Ultimately, whether treatment with aligners is possible, advisable and effective always depends on the nature of the misalignment.

Advantages of removable appliances and aligners:

  • Oral hygiene is not compromised. You can clean your teeth and the appliances thoroughly without any restrictions.
  • There are no dietary restrictions.
  • Aligners are barely visible and are therefore very popular with adults too.

Disadvantages of removable braces and aligners:

  • A high level of compliance is required (day and night).
  • Speech may be affected, particularly whenever you switch to a new aligner.
  • Sometimes, fine-tuning the teeth is not achieved to a satisfactory standard.
  • The long-term effects of aligner materials in the mouth are not yet known, particularly where the aligners are subject to heavy wear due to teeth grinding.

Orthodontic treatment with fixed appliances (= ‘brackets’)

Unlike removable appliances, the multi-bracket appliance is permanently attached to the teeth and can only be removed by the orthodontist.

These appliances consist of ring-shaped bands with welded clasps and tubes on the back molars, and brackets on the premolars and front teeth. They are bonded directly to the teeth using an adhesive. The thin, highly elastic archwires inserted into the bands and brackets apply precisely controlled forces to correct misaligned teeth. Auxiliary components such as elastic bands, springs or other appliances are used as required.

Visible or invisible brackets?

Brackets are high-tech plates that are bonded to the teeth by the orthodontist either directly ‘freehand’ or using special transfer splints.
Brackets are available in a range of materials:

  • Metal (stainless steel)
  • Ceramic
  • Plastic (rare)

Stainless steel is the ideal material due to its properties. Plastic brackets discolour and become misshapen. Although ceramic brackets are less noticeable, they are larger and thicker than metal brackets. They are therefore more difficult to clean, come loose more easily than metal brackets and can also break, causing damage to the teeth if they come into contact with them.

There are countless bracket systems on the market. Ultimately, it does not matter which brackets an orthodontist uses. What is crucial for the outcome is the orthodontist’s expertise, experience and skill.

Treatment with fixed braces requires a high level of technical skill and a sound understanding of the biomechanical principles of tooth movement. Specialist orthodontists must undergo continuous professional development to keep abreast of the latest treatment techniques and materials in line with the current state of scientific knowledge.

Invisible brackets

Some orthodontists specialise in lingual bracket systems. The brackets are attached to the inside of the teeth, making them invisible from the outside. This treatment is more expensive because it requires additional laboratory processes and involves a greater amount of work. From a medical point of view, lingual braces rarely offer any advantages; furthermore, this specialised technique cannot be used for every type of misalignment.

For several years now, orthodontists have even been using mini-implants (mini-screws) as aids for specific movements or to temporarily stabilise certain teeth. To this end, small pins are usually inserted, particularly in adults, into the front of the palate. These mini-implants are used for anchorage so as not to overburden the other teeth or to enable several movements to be carried out simultaneously.

As malocclusions are usually caused by a combination of dental misalignments (e.g. lack of space, severe tooth rotation, displacement of individual teeth) and jaw misalignment (retrognathia of the lower jaw), a combination of removable and fixed appliances may also be necessary in certain cases.

Fixed appliances are mainly used on the permanent dentition in adults and adolescents.

Partially fixed appliances are also used during the mixed dentition phase. Where necessary, they are combined with removable appliances.

Main applications of fixed appliances in general:

  • Movement of the tooth, including the root, within the jawbone
  • Movement of teeth in all three spatial directions
  • Correction of tooth rotation and inclination
  • Alignment of displaced teeth

Main
areas of application for fixed appliances in particular

  • Complex movement of individual teeth in the mixed dentition and permanent dentition
  • Closing gaps following tooth extractions
  • Closing gaps in cases of hereditary hypodontia (e.g. absence of lateral incisors in the upper jaw)
  • Retraction of front teeth that have grown too far out of the jaw (e.g. deep bite caused by the lower incisors biting into the palatal mucosa)
  • Correction of tooth migration caused by periodontal disease in adults
  • Root torque: a specific tilting of the tooth root without altering the position of the tooth crown. This is particularly necessary in cases of overbite, including during the mixed dentition stage.
  • Correction of lateral occlusion through the addition of springs or bars between the upper and lower jaws

What are the advantages of fixed appliances?

  • Fixed appliances are suitable for treating almost all types of malocclusion
  • The treatment time is shorter than with removable appliances
  • Patient cooperation is only required to a limited extent, or can be completely eliminated through appropriate design of the appliance
  • It is possible to position the teeth precisely in their ideal position (fine adjustment)
  • Speech is not impeded, unless the braces are lingual (fixed on the inside of the teeth)

What are the disadvantages of fixed braces?

  • Oral hygiene requires a high degree of discipline. The brackets create crevices, which make oral hygiene more difficult.
    However, fixed braces do not damage the tooth enamel as long as oral hygiene is carried out correctly!
  • Some restrictions on what you can eat: Sticky and hard foods such as popcorn, nuts or bread crusts should be avoided.
  • Irritation of the oral mucosa at the start of treatment
  • In susceptible individuals, root shortening may occur
  • Aesthetic concerns: The use of tooth-coloured brackets made of plastic or ceramic may be a solution. However, this is only an option where tooth movement is not too extensive. When using the lingual technique – a specialised method involving brackets attached to the inside of the teeth – there is no aesthetic impairment whatsoever.

In cooperation with the

Association of Austrian Orthodontists (VÖK)

VÖK Logo
  • Author

    Gernot Hofer

More on this topic
Hormones

Low testosterone in men: symptoms, causes and treatment

Fatigue, a reduced sex drive, and a lack of energy: these symptoms can have many causes. One possible explanation is a testosterone deficiency. However, it is not possible to determine whether testosterone levels are actually too low based solely on the symptoms or on a single blood test result.

Men's health
Men's health

PSA level: What does it mean, and when is it too high?




The PSA level is one of the best-known laboratory test results relating to the prostate. Many men come across it for the first time during a screening examination or when having symptoms investigated. An abnormal result often raises questions: Is this already a sign of prostate cancer? What levels are considered normal?

Prostate
Pollen allergy

The right diet for hay fever

Anyone suffering from hay fever should pay particular attention to their diet so as not to make the symptoms any worse.

Nutrition
Urology

Prostate health: What men need to know

The prostate is a gland in a man’s body that is only the size of a chestnut, but it plays a crucial role in well-being, urinary function and male sexuality. Benign enlargement and prostate cancer become more common in older age.

Prostate