What are veneers?
Veneers are wafer-thin, translucent shells, usually made of ceramic. They are permanently bonded to the surface of each individual tooth by the dentist using a special adhesive. This allows tooth discolouration, slight misalignment, as well as minor chips or gaps in the teeth to be corrected, restoring an aesthetically pleasing appearance.
This dental procedure is usually carried out on front teeth. However, veneers can also be bonded to molars.
Compared with dental crowns, which can also be used for aesthetic corrections, veneers have a decisive advantage: when fitting crowns, the dentist must work with a metal framework and also grind away a large portion of the tooth’s hard tissue before the crown can be fitted. Furthermore, with dental crowns, dark margins are often visible at the junction between the tooth and the gum. This cannot happen with veneers, as they do not require a metal framework.
What types of veneers are there?
Experts distinguish between four different types of veneers, which vary in thickness, method of attachment and material.
- Conventional veneers: These are made of ceramic and are up to one millimetre thick. They are custom-made to fit the shape of the tooth in a dental laboratory. Before they are fitted, the outer surface of the tooth must be minimally ground down.
- Non-prep veneers: These are also made of ceramic, but are only around 0.2–0.3 millimetres thick, making them significantly thinner than conventional veneers. No preparation is required before they are fitted. The dental impression and the fabrication process are carried out without grinding away any tooth structure.
- Veneers-to-go: These are standardised instant veneers. They are made either from all-ceramic material or a composite of resin and ceramic. Before they are fitted, the tooth structure requires either no grinding at all or only very slight grinding. Veneers-to-go are customised to the shape of the tooth and bonded in place during a single appointment at the dentist’s.
- Composite veneers: These are made from dental resins, which are also used for traditional fillings. Before the veneers are fitted, only the smooth tooth surface needs to be roughened with a special solution to ensure the composite adheres properly.
What does a veneer treatment involve?
Treatment with conventional veneers takes place in three to four stages.
- Preparation: Following a consultation and examination by the dentist, the teeth are thoroughly cleaned where necessary, and any other dental problems are treated.
- Preparation and fabrication: With conventional veneers, the relevant teeth are lightly ground down so that the veneers do not appear too thick but look natural.
- Impression and fabrication: An impression of the teeth is then taken, and the patient is fitted with a temporary plastic veneer until the actual veneer has been completed by the dental technician and can be fitted by the dentist.
- Bonding: Once the colour and shape are correct, the veneer is bonded to the tooth by the dentist using a special adhesive and light-cured.
For treatment with non-prep veneers, composite veneers and Veneers-to-go, no grinding of the teeth is necessary and a dental technician is not involved. This also means the process is much quicker; however, non-prep veneers are more expensive, and composite veneers often wear out more quickly and are not suitable for severely damaged teeth. Veneers-to-go, on the other hand, are not suitable for every patient or every tooth, as they are standardised products.
Advantages and disadvantages of veneers at a glance
| Advantages | Disadvantages |
| Protect against discolouration caused by coffee, tea, etc. | There is some loss of tooth structure |
| Allow existing discolouration to be corrected | In cases of very dark discolouration, the veneers may be too thin to achieve the desired colour correction |
| Are well tolerated and durable | Not suitable for every aesthetic issue |
How much do veneers cost?
Treatment with veneers is generally regarded as a purely aesthetic procedure. Consequently, in the vast majority of cases, veneers must be paid for privately. Furthermore, a distinction is made between the cost of materials and the cost of treatment:
- Prices for a ‘Veneer-to-go’ are quoted at between 300 and 400 euros.
- Conventional veneers cost between 500 and 800 euros per tooth.
- Composite veneers cost between 250 and 400 euros per tooth.
- Prices for non-prep veneers are quoted at between 600 and 900 euros per tooth.
Who are veneers not suitable for?
Experts tend to advise against veneer treatment for people who do not practise thorough oral hygiene and for patients who are prone to teeth grinding. Poor dental care often leads to tooth decay at the junction between the tooth and the veneer, and teeth grinding can damage the veneers.